6.2　Transporting and Casting Equipment for Ladle

6.2.1　The new and revamped caster shall adopt the ladle turret.

6.2.2　The existing workshop with poor casting conditions shall adopt the stationary lade seat frame or the seat frame with movable ladle car for casting.

6.2.3　The ladle turret with big capacity shall be the hydraulic single-arm lifting and lowering turret.

6.2.4　In case the ladle placed on the turret is not equipped with cover，the ladle covering unit shall be provided on the ladle turret.

6.2.5　The ladle turret shall be provided with emergency drive unit.

6.2.6　When protective casting is used，the ladle lifting and lowering device shall be adopted.The lifting and lowering speed is preferably 0.8m/min-1.8m/min；and the lifting and lowering stroke is 600mm-1000mm.

6.2.7　The rotary drive of ladle turret shall be equipped with brake.

6.2.8　The ladle turret is preferably equipped with weighing unit，and the measures for prevention of lateral force as well as thermal isolation and cooling measures shall be taken.

6.2.9　The foundation anchor bolt of ladle turret shall adopt high strength prestress bolt.

6.2.10　Ladle turret shall be equipped with separate lubrication system.